- Advisory services
- Consultations
- Network and technology policies
- Network and technology service docs
- Using Jisc community
- Network and technology service docs
- Domain name registration
- How to sign up
- Janet Support Manual
- Janet CSIRT
- Back-up services
- eduroam
- Backup Web Hosting
- Certificate Service
- Connection timeline
- Eligibility
- Janet 3G Buyer's Guide
- Janet 3G eduroam interoperablity authentication methods
- Janet Mail Services
- Janet Network Charges
- Janet Reach
- Janet Videoconferencing Feedback results
- Primary connections
- Supporting Business Continuity
- Business and Community Engagement (BCE) using Janet
- Cost
- Interconnect connections
- Connecting student accommodation
- Customer-owned routing equipment
- Obtaining a Janet IP Address Range
- Terms for the Provision of the Janet Service
- Upgrading your existing bandwidth and Janet router
- Fault reporting
- IP address assignment
- Janet Aurora
- Janet Netsight
- Janet txt
- Routers
- Network set-up
- Guest access
- Network time service
- Training
- Contact
- Primary Nameserver Service
- Secondary Nameserver Service
- Vscene
Secondary Nameserver Service

- All Janet services are governed by the Janet policies.
As a minimum, Janet recommends that you run your primary nameserver within your organisation, and use a secondary off-site. Many organisations connected to Janet have reciprocal arrangements regarding the provision of off-site secondary nameservers, but if that is not suitable then Janet can arrange for the Janet Network Operations and Service Centre to provide this service for you.
What are the technical requirements?
In order to use the service, the primary nameserver must permit zone transfers to the nominated secondary nameserver(s). In addition, you should ensure that your firewall permits UDP and TCP traffic between the primary nameserver and the Janet secondary nameserver on port 53.
To start or stop the service
If you want Janet to arrange a secondary nameserver on your behalf, contact the Janet Service Desk at service@ja.net who will discuss the details with you and start the process.
If at any point you decide you want to cancel the service and run your own secondary nameserver, just contact the Janet Service Desk at service@ja.net again.